For technical support contact us. Please click HERE.

 

Free upgrade ISONIC Family instruments with latest software release:


ISONIC utPod for PC Software Package
 

  • Download file ISONIC_utPod_for_PC.zip into computer then extract all its contents into a separate folder on the hard disk, for example C:\ISONIC_utPod
  • Run utPodSetup.exe program located in that folder


Note: The ISONIC utPod for PC software package should be installed in the PC that may be running either under Win'XP or Win'7 or Win'8 


ISONIC utPod Firmware Update Package - Revision 1.6

Download file utPodUpdater.zip into computer then follow the instructions of Paragraph 9.3 of ISONIC utPod Operating Manual – latest release 


ISONIC 2005 Software for Windows 98SE instruments

 

  • Download file ISONIC_2005_Setup.zip into computer then extract all its contents into a separate folder on the hard disk, for example C:\ISONIC2005UPGR
  • Copy directory ISONIC2005UPGR and all its contents onto USB Memory stick
  • Switch ISONIC 2005 instrument ON
  • On receiving ISONIC 2005 start screen click on Exit to Windows
  • Insert USB Memory stick into USB port of ISONIC 2005 instrument
  • Double Click on My Computer icon
  • Find icon related to connected memory stick (disk on key) and explore it
  • Double click the icon of ISONIC2005UPGR folder
  • Run setup.exe program located in that folder


ISONIC 2005 Software for W'XPEmb instruments 
 

  • Download file ISONIC_2005_XP_EMB_setup.zip into computer then extract all its contents into a separate folder on the hard disk, for example C:\ISONIC2005UPGR
  • Copy directory ISONIC2005UPGR and all its contents onto USB Memory stick
  • Switch ISONIC 2005 instrument ON
  • On receiving ISONIC 2005 start screen click on Exit to Windows
  • Insert USB Memory stick into USB port of ISONIC 2005 instrument
  • Double Click on My Computer icon
  • Find icon related to connected memory stick (disk on key) and explore it
  • Double click the icon of ISONIC2005UPGR folder
  • Run I2005Setup.exe program located in that folder


Note: To control ISONIC 2005 remotely through LAN using the resourses of an external PC for the operative indication, data processing, imaging, and acquisition the same software should be installed in the PC that running either under Win'XP or Win'7 or Win'8. To install software in the PC follow the same rules as for the instrument but upon the setup routine started:

  • uncheck the option Start software on system startup
  • check the option Install Client Only
  • click on the Install button



ISONIC 2020 Software for W'XPEmb instruments
 

  • Download file ISONIC_2020_SETUP.zip into computer then extract all its contents into a separate folder on the hard disk, for example C:\ISONIC2005UPGR
  • Copy directory ISONIC2020UPGR and all its contents onto USB Memory stick
  • Switch ISONIC 2020 instrument ON
  • On receiving ISONIC 2020 start screen click on Exit to Windows
  • Insert USB Memory stick into USB port of ISONIC 2020 instrument
  • Double Click on My Computer icon
  • Find icon related to connected memory stick (disk on key) and explore it
  • Double click the icon of ISONIC2020UPGR folder
  • Run I2020Setup.exe program located in that folder


Note: To control ISONIC 2020 remotely through LAN using the resourses of an external PC for the operative indication, data processing, imaging, and acquisition the same software should be installed in the PC that running either under Win'XP or Win'7 or Win'8. To install software in the PC follow the same rules as for the instrument but upon the setup routine started:

  • uncheck the option Start software on system startup
  • check the option Install Client Only
  • click on the Install button


ISONIC STAR Software for W'XPEmb instruments
 

  • Download file ISONIC_STAR_SETUP.zip into computer then extract all its contents into a separate folder on the hard disk, for example C:\ISONIC2005UPGR
  • Copy directory ISONICSTARUPGR and all its contents onto USB Memory stick
  • Switch ISONIC STAR instrument ON
  • On receiving ISONIC STAR start screen click on Exit to Windows
  • Insert USB Memory stick into USB port of ISONIC STAR instrument
  • Double Click on My Computer icon
  • Find icon related to connected memory stick (disk on key) and explore it
  • Double click the icon of ISONICSTARUPGR folder
  • Run IStarSetup.exe program located in that folder


Note: To control ISONIC STAR remotely through LAN using the resourses of an external PC for the operative indication, data processing, imaging, and acquisition the same software should be installed in the PC that running either under Win'XP or Win'7 or Win'8. To install software in the PC follow the same rules as for the instrument but upon the setup routine started:

  • uncheck the option Start software on system startup
  • check the option Install Client Only
  • click on the Install button



ISONIC 2006 Software for Windows 98SE instruments

  • Download file ISONIC_2006_Setup.zip into computer then extract all its contents into a separate folder on the hard disk, for example C:\ISONIC2006UPGR
  • Download file ISONIC_2006_PATCH_2010_05_23.ex_ into the same on the hard disk, for example C:\ISONIC2006UPGR
  • then rename file 2006_PATCH_2010_05_23.ex_ into 2006_PATCH_2010_05_23.exe
  • Copy directory ISONIC2006UPGR and all its contents onto USB Memory stick
  • Switch ISONIC 2006 instrument ON
  • On receiving ISONIC 2006 start screen click on Exit to Windows
  • Insert USB Memory stick into USB port of ISONIC 2006 instrument
  • Double Click on My Computer icon
  • Find icon related to connected memory stick (disk on key) and explore it
  • Double click the icon of ISONIC2006UPGR folder
  • Run setup.exe program located in that folder
  • Run 2006_PATCH_2010_05_23.exe program located in that folder



ISONIC 2006 Software for W'XPEmb instruments

  • Download file ISONIC_2006_Setup.zip into computer then extract all its contents into a separate folder on the hard disk, for example C:\ISONIC2006UPGR
  • Copy directory ISONIC2006UPGR and all its contents onto USB Memory stick
  • Switch ISONIC 2006 instrument ON
  • On receiving ISONIC 2006 start screen click on Exit to Windows
  • Insert USB Memory stick into USB port of ISONIC 2006 instrument
  • Double Click on My Computer icon
  • Find icon related to connected memory stick (disk on key) and explore it
  • Double click the icon of ISONIC2006UPGR folder
  • Run setup.exe program located in that folder



ISONIC 2007 Software for Windows 98SE instruments

  • Download file ISONIC_2007_Setup.zip into computer then extract all its contents into a separate folder on the hard disk, for example C:\ISONIC2007UPGR
  • Copy directory ISONIC2007UPGR and all its contents onto USB Memory stick
  • Switch ISONIC 2007 instrument ON
  • On receiving ISONIC 2007 start screen click on Exit to Windows
  • Insert USB Memory stick into USB port of ISONIC 2007 instrument
  • Double Click on My Computer icon
  • Find icon related to connected memory stick (disk on key) and explore it
  • Double click the icon of ISONIC2007UPGR folder
  • Run setup.exe program located in that folder



ISONIC 2007 Software for W'XPEmb instruments

  • Download file ISONIC_2007_XP_EMB_setup.zip into computer then extract all its contents into a separate folder on the hard disk, for example C:\ISONIC2007UPGR
  • Copy directory ISONIC2007UPGR and all its contents onto USB Memory stick
  • Switch ISONIC 2007 instrument ON
  • On receiving ISONIC 2007 start screen click on Exit to Windows
  • Insert USB Memory stick into USB port of ISONIC 2007 instrument
  • Double Click on My Computer icon
  • Find icon related to connected memory stick (disk on key) and explore it
  • Double click the icon of ISONIC2007UPGR folder
  • Run I2007Setup.exe program located in that folder


Note: To control ISONIC 2007 remotely through LAN using the resourses of an external PC for the operative indication, data processing, imaging, and acquisition the same software should be installed in the PC that running either under Win'XP or Win'7 or Win'8. To install software in the PC follow the same rules as for the instrument but upon the setup routine started:

  • uncheck the option Start software on system startup
  • check the option Install Client Only
  • click on the Install button




ISONIC 2008 Software for W'XPEmb instruments

  • Download file ISONIC_2008_Setup.zip into computer then extract all its contents into a separate folder on the hard disk, for example C:\ISONIC2008UPGR
  • Copy directory ISONIC2008UPGR and all its contents onto USB Memory stick
  • Switch ISONIC 2008 instrument ON
  • On receiving ISONIC 2008 start screen click on Exit to Windows
  • Insert USB Memory stick into USB port of ISONIC 2008 instrument
  • Double Click on My Computer icon
  • Find icon related to connected memory stick (disk on key) and explore it
  • Double click the icon of ISONIC2008UPGR folder
  • Run I2008Setup.exe program located in that folder


Note: To control ISONIC 2008 remotely through LAN using the resourses of an external PC for the operative indication, data processing, imaging, and acquisition the same software should be installed in the PC that running either under Win'XP or Win'7 or Win'8. To install software in the PC follow the same rules as for the instrument but upon the setup routine started:

  • uncheck the option Run on Windows startup
  • check the option Install Client Only
  • click on the Install button




ISONIC AVTScan - Material Thickness Measurement and Recording Based on Automatic Determining of Ultrasound Velocity: Optional Inspection Software for ISONIC 2008/2, ISONIC 2008/4, ISONIC 2008 instruments and for ISONIC 2010 Phased Array instruments carrying 2 Conventional Channels

  • Download file ISONIC_AVTScan_Setup.zip into computer then extract all its contents into a separate folder on the hard disk, for example C:\ISONIC_AVTScan
  • Copy directory ISONIC_AVTScan and all its contents onto USB Memory stick
  • Switch ISONIC 2008 / 2010 instrument ON
  • On receiving ISONIC 2008 / 2010 start screen click on Exit to Windows
  • Insert USB Memory stick into USB port of ISONIC 2008 / 2010 instrument
  • Double Click on My Computer icon
  • Find icon related to connected memory stick (disk on key) and explore it
  • Double click the icon of ISONIC_AVTScan folder
  • Run AVTSetup.exe program located in that folder

Note: the instrument card should have special code burned in run this application 


ISONIC 2009 UPA Scope Software for W'XPEmb Instruments 1 X 64:64 / 2 X 32:32 Phased Array and 8 Conventional Channels 

  • Download file ISONIC_2009_8_setup.zip into computer then extract all its contents into a separate folder on the hard disk, for example C:\ISONIC2009UPGR
  • Copy directory ISONIC2009UPGR and all its contents onto USB Memory stick
  • Switch ISONIC 2009 instrument ON
  • On receiving ISONIC 2009 start screen click on Exit to Windows
  • Insert USB Memory stick into USB port of ISONIC 2009 instrument
  • Double Click on My Computer icon
  • Find icon related to connected memory stick (disk on key) and explore it
  • Double click the icon of ISONIC2009UPGR folder
  • Run I2009Setup.exe program located in that folder


Note: To control ISONIC 2009 UPA Scope remotely through LAN using the resourses of an external PC for the operative indication, data processing, imaging, and acquisition the same software should be installed in the PC that running either under Win'XP or Win'7 or Win'8. To install software in the PC follow the same rules as for the instrument but upon the setup routine started:

  • uncheck the option Run on Windows startup
  • check the option Install Client Only
  • click on the Install button



ISONIC 2009 UPA Scope Software for W'XPEmb Instruments 1 X 64:64 / 2 X 32:32 Phased Array and 1 Conventional Channel

  • Download file ISONIC_2009_1_setup.zip into computer then extract all its contents into a separate folder on the hard disk, for example C:\ISONIC2009UPGR
  • Copy directory ISONIC2009UPGR and all its contents onto USB Memory stick
  • Switch ISONIC 2009 instrument ON
  • On receiving ISONIC 2009 start screen click on Exit to Windows
  • Insert USB Memory stick into USB port of ISONIC 2009 instrument
  • Double Click on My Computer icon
  • Find icon related to connected memory stick (disk on key) and explore it
  • Double click the icon of ISONIC2009UPGR folder
  • Run I2009Setup.exe program located in that folder


Note: To control ISONIC 2009 UPA Scope remotely through LAN using the resourses of an external PC for the operative indication, data processing, imaging, and acquisition the same software should be installed in the PC that running either under Win'XP or Win'7 or Win'8. To install software in the PC follow the same rules as for the instrument but upon the setup routine started:

  • uncheck the option Run on Windows startup
  • check the option Install Client Only
  • click on the Install button



ISONIC 2010 Software for W'XPEmb Instruments 1 X 32:32 / 2 X 16:16 Phased Array and 1 Conventional Channel

  • Download file ISONIC_2010_setup.zip into computer then extract all its contents into a separate folder on the hard disk, for example C:\ISONIC2010UPGR
  • Copy directory ISONIC2010UPGR and all its contents onto USB Memory stick
  • Switch ISONIC 2010 instrument ON
  • On receiving ISONIC 2010 start screen click on Exit to Windows
  • Insert USB Memory stick into USB port of ISONIC 2010 instrument
  • Double Click on My Computer icon
  • Find icon related to connected memory stick (disk on key) and explore it
  • Double click the icon of ISONIC2010UPGR folder
  • Run I2010Setup.exe program located in that folder


Note: To control ISONIC 2010 remotely through LAN using the resourses of an external PC for the operative indication, data processing, imaging, and acquisition the same software should be installed in the PC that running either under Win'XP or Win'7 or Win'8. To install software in the PC follow the same rules as for the instrument but upon the setup routine started:

  • uncheck the option Run on Windows startup
  • check the option Install Client Only
  • click on the Install button



ISONIC 2010 Software for W'XPEmb Instruments 1 X 32:32 / 2 X 16:16 Phased Array and 2 Conventional Channels

  • Download file ISONIC_2010_setup.zip into computer then extract all its contents into a separate folder on the hard disk, for example C:\ISONIC2010UPGR
  • Copy directory ISONIC2010UPGR and all its contents onto USB Memory stick
  • Switch ISONIC 2010 instrument ON
  • On receiving ISONIC 2010 start screen click on Exit to Windows
  • Insert USB Memory stick into USB port of ISONIC 2010 instrument
  • Double Click on My Computer icon
  • Find icon related to connected memory stick (disk on key) and explore it
  • Double click the icon of ISONIC2010UPGR folder
  • Run I2010Setup.exe program located in that folder


Note: To control ISONIC 2010 remotely through LAN using the resourses of an external PC for the operative indication, data processing, imaging, and acquisition the same software should be installed in the PC that running either under Win'XP or Win'7 or Win'8. To install software in the PC follow the same rules as for the instrument but upon the setup routine started:

  • uncheck the option Run on Windows startup
  • check the option Install Client Only
  • click on the Install button



ISONIC 2010 EL Software for W'XPEmb Instruments 1 X 16:16 Phased Array and 1 Conventional Channel

  • Download file ISONIC_2010_EL_16_CH_SETUP.zip into computer then extract all its contents into a separate folder on the hard disk, for example C:\ISONIC2010_EL_UPGR
  • Copy directory ISONIC2010_EL_UPGR and all its contents onto USB Memory stick
  • Switch ISONIC 2010 EL instrument ON
  • On receiving ISONIC 2010 EL start screen click on Exit to Windows
  • Insert USB Memory stick into USB port of ISONIC 2010 EL instrument
  • Double Click on My Computer icon
  • Find icon related to connected memory stick (disk on key) and explore it
  • Double click the icon of ISONIC2010_EL_UPGR folder
  • Run I2010Setup.exe program located in that folder


Note: To control ISONIC 2010 EL remotely through LAN using the resourses of an external PC for the operative indication, data processing, imaging, and acquisition the same software should be installed in the PC that running either under Win'XP or Win'7 or Win'8. To install software in the PC follow the same rules as for the instrument but upon the setup routine started:

  • uncheck the option Run on Windows startup
  • check the option Install Client Only
  • click on the Install button



ISONIC XY SCAN (PANELSCAN): C-Scan Compression Wave Inspection of the panels made of composites, metals, etc using Linear Array Probes with ISONIC 2009 UPA Scope / ISONIC 2010 instrument 

  • Download file ISONIC_PA_XY_Scan_Setup.zip into computer then extract all its contents into a separate folder on the hard disk, for example C:\ISONIC_PA_XY_Scan_Setup
  • Run XYScanSetup.exe program located in that folder
  • Note: The maximal performance will be achieved through install and run of ISONIC XY SCAN (PANELSCAN) software in the external computer connected to the instrument over Ethernet


Note: The ISONIC XY SCAN (PANELSCAN) software package should be installed in the PC controlling either ISONIC 2009 UPA Scope or ISONIC 2010 instrument remotely through LAN. The resourses of an external PC for the operative indication, data processing, imaging, and acquisition are used by the software. The PC may be running either under Win'XP or Win'7 or Win'8 


ISONIC EXPERT DUET / DUET_M: Software Package for the Inspection of Planar Butt / Circumferential / Longitudinal Welds Using ISONIC 2009 UPA Scope / ISONIC 2010 instrument Organized as 2 X 32:32 / 2 X 16:16 PA and Pair of PA Probes Combining Sector / Linear Scan Pulse Echo Techniques, TOFD Technique, and Pitch-Catch K-Pattern Technique for the Detection of Transversal Cracks - Strip Chart Recording and True-To-Geometry Imaging

  • Download file ISONIC_EXPERT_DUET_setup.zip into computer then extract all its contents into a separate folder on the hard disk, for example C:\ISONIC_EXPERT_DUET_setup
  • Run IDuetSetup.exe program located in that folder
  • Note: The maximal performance will be achieved through install and run of ISONIC EXPERT DUET / DUET_M software in the external computer connected to the instrument over Ethernet




ISONIC PA Office: Posptprocessing Package For PC for All Types of Phased Array Modality Files Captured by ISONIC 2009 UPA Scope / ISONIC 2010 Instruments of All Configurations

  • Download file ISONIC_PA_Office_Setup.zip into computer then extract all its contents into a separate folder on the hard disk, for example C:\IPAOfficeSetup
  • Run IPAOfficeSetup.exe program located in that folder


Note: The ISONIC PA OFFICE software package should be installed in the PC that may be running either under Win'XP or Win'7 or Win'8 


ISONIC PA W_PUZZLE: Posptprocessing Package For PC for Phased Array Weld Inspection Files Captured by ISONIC 2009 UPA Scope / ISONIC 2010 Instruments using EXPERT, EXPERT CU, VLFS, VLFS CU SW Packages

  • Download file ISONIC_W_PUZZLE_SETUP.zip into computer then extract all its contents into a separate folder on the hard disk, for example C:\ISONIC_W_PUZZLE_SETUP
  • Run IWPuzzleSetup.exe program located in that folder


Note: The ISONIC W_PUZZLE software package should be installed in the PC that may be running either under Win'XP or Win'7 or Win'8 


ISONIC AVTScan PP: Posptprocessing Package For PC for AVTScan Files Captured by ISONIC 2008 / ISONIC 2010 Instruments using ISONIC AVTScan Inspection SW Package

  • Download file ISONIC_AVTScan_PP_Setup.zip into computer then extract all its contents into a separate folder on the hard disk, for example C:\ISONIC_AVTScan_PP_SETUP
  • Run AVTPPSetup.exe program located in that folder


Note: The ISONIC AVTScan_PP software package should be installed in the PC that may be running either under Win'XP or Win'7 or Win'8 


This email address is being protected from spambots. You need JavaScript enabled to view it.

To get upgraded choose the contact form or e-mail serial # of your ISONIC PA AUT instrument to This email address is being protected from spambots. You need JavaScript enabled to view it..

Note: This software package should be installed in the PC that may be running either under Win'XP or Win'7 or Win'8 


Posptprocessing Package (Viewer) For PC for Files Captured by ISONIC PA AUT Instrument During Automatic Inspection of Girth Welds with Multi-Zonal Discrimination and Simultaneous Use of PA, TOFD, and Conventional PE Probes According to ASTM 1961

  • Download file Postprocessing.zip into computer then extract all its contents into a separate folder on the hard disk, for example C:\ISONIC_PA_AUT_MZONE_PP_Setup
  • Run PAMZPPSetup.exe program located in that folder


Note: This software package should be installed in the PC that may be running either under Win'XP or Win'7 or Win'8 


Posptprocessing Package (Viewer) For PC for Files Captured by ISONIC PA AUT Instrument During Automatic Inspection of Girth Welds with Multi-Zonal Discrimination and Simultaneous Use of PA, TOFD, and Conventional PE Probes According to ASTM 1961 Using Inspection Software Package Issued Before November 3, 2013 

  • Download file Postprocessing_OLD.zip into computer then extract all its contents into a separate folder on the hard disk, for example C:\ISONIC_PA_AUT_MZONE_PP_Setup
  • Run PAPPSetup.exe program located in that folder


Note: This software package should be installed in the PC that may be running either under Win'XP or Win'7 or Win'8 


This email address is being protected from spambots. You need JavaScript enabled to view it. 

To get upgraded choose the contact form or e-mail serial # of your ISONIC PA AUT instrument to This email address is being protected from spambots. You need JavaScript enabled to view it..

Note: This software package should be installed in the PC that may be running either under Win'XP or Win'7 or Win'8 


Posptprocessing Package (Viewer) For PC for Files Captured by ISONIC PA AUT Instrument During ASME 2235 Compatible Automatic / Semi-Automatic Multi-Group Inspection of Welds with Simultaneous Use of PA, TOFD, and Conventional PE Probes

  • Download file Postprocessing.zip into computer then extract all its contents into a separate folder on the hard disk, for example C:\ISONIC_PA_AUT_MGROUP_PP_Setup
  • Run PAMGPPSetup.exe program located in that folder


Note: This software package should be installed in the PC that may be running either under Win'XP or Win'7 or Win'8 

 

 

 

United NDT and Sonotron NDT are solution providers in Ultrasonic testing.

We not only provide High-Tech Ultrasonic Inspection equipment, we also develop and manufacture Hard- and Software for special applications. Whether you are looking for testing solutions with single- and multichannel instruments, conventional ultrasonic technology or advanced Phased ArrayTOFD, manual, semi-automatic and automatic scanner Systems.

 

WE ARE YOUR PARTNER!

 

Let us know what you are looking for. Click HERE to  send your request..

 

VIDEO

Login Form